automatic cosmetic soft tube heater filling and sealing machine Ultrasonic tubes filler sealer

I. Introduction and function for soft tube filling and sealing machine
This machine applies the transmission principle. It uses the slot wheel dividing system to drive the turntable to do intermittent
movement. The machine has 10 sits. Expect manually putting the tubes on the machine, it can automatically fill the material
into the tubes, heat both inside and outside of the tubes, seal the tubes, press the codes, and cut the tails and exit the finished
tubes. Filling measurement is accurate. Heating time is stable and adjustable. Sealed tail looks pretty and neat and the trimming
is very even. This machine has stable performance and work without any noise and pollution.
The part which is contact with the filling material is made of high-quality stainless steels. The parts which need to clean are
made of quick-change device that is removable and convenient for washing.
If some materials need heating insulation, the heating thermostat device can be added outside of the feeding barrel.
II. Application range of Ultrasonic tubes filler sealer
It can fill and seal the plastic tubes and plastic-aluminum laminated tubes. It is widely used in the cosmetic, medicine, adhesive
and shoe polish, food industries.
III. Characteristics of soft tube filling and sealing machine
1. the material contact parts are made of stainless steel SUS304;
2. the connection of the various is used the quick-change device, which is easy to disassemble and clean;
3. high-quality pneumatic components
IV. Main technical parameters of plastic tube filling and sealing machine:
1. power: ~220V,0.75kw
2. power consumption: 350W*2 +250W*2=1.2KW
3. filling volume: 50,100,200,250(ml)(customized)
4. Producing speed: 30-50pcs/min
5. filling accuracy: 1%
6. machine dimension: 1100X800X1600(mm)
7. Machine weight: 280kg
8. working air pressure: more than 0.4Mpa
About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped
by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine
cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot
margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted
on the wooden case.
Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final
testing of the whole system.
B-On-site installation:
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in
this period should be paid by User,the subsidy is 50USD/day.
C-Technical support:
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee
period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by
misoperation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the
machine in cost price.

Related Products