Automatic labeling machine for objects three sides labeler flat square bottle label applicator
Any questions,feel free to contact me.
Email: [email protected] Skype:zhang.tracy6 Tel:0086-13262514660
Click here to subscribe us
1.The scope of application
Labeling one side, two sides, three sides or more sides on different kinds objects as client need with one label.
(P.S. our labeling machine can be designed according to your needs)
2. Device Characteristic
Adopt mature technology PLC control system, operation is stable andhigh-speed
Using touch-screen control operating system, simple, practical, efficient;
Screw adjustment suppressing mechanism, suppress bottle move accurately;
Synchronization chain mechanism to ensure smooth and precise calibration;
The speed of Conveyor belt,righting belt,order bottle beltcan controlled variably.
No objectno label, automatic alarming without label.
The width and height of the machine can adjust to suit different size of the bottles.
Main technical parameters:
Operating direction Right/Left
Production(bottle/min) 1500-2000BPH(subject to the size of objects and labels)
Conveyor speed(meter/min) ≤40
Labeling accuracy ±1.0mm
The application label adhesive sticker , transparent or opaque label
The inner diameter of label roll 76mm
The outer diameter of label roll 350mm(max)
The application size of label Width 15-140mm, length15-300mm
The application size of bottle can customized as label objects
Voltage AC 110V/220V 50/60HZ
Machine Size(mm) 2400(L) 1350(W) 1500(H)mm
1. Fix the label roll on the machine according to the graphical representation, adjust the height of each part.
2. Check if all the position of the labels are correct.
3. Adjust the distance between the two rails, the distance between the brush and the conveyer, make sure the distance is suitable for the product to pass.
4. Turn on the power switch, turn on the optoelectronic switch.
5. Turn on switch of the motor and label sending device, debug labeling, if there are any abnormal, get rid of them.
6. Adjust the labeling position.
7. Ensure the test is OK, then operating the machine normally.
8. Power off.
According to client specific labeling requirement, supply reasonable machine sketch map,quotation and similar video for client ref first.
1) Depends on client products and labeling position, made reasonable reform base on the standard machine.
2) Repeat 20 ongoing hours testing equipment operation stability .
3) Execute GMP certification for the equipment and materials used in the production process requirement and specification strictly.
1. Range experienced senior engineer come to client company for installation .
2. Supply systematic operation training for client workers.
3. Guarantees all equipment (except human factors) within one year, lifetime maintenance sevices.
4. After client use the machine for several years, we can provide a detailed refurbishment program, the original equipment and replacement of hardware and software upgrades.
5. If quality problems arise, the supplier provide technical support and timely supply wearing parts.