Any questions,feel free to contact me.
Email: [email protected] Skype:zhang.tracy6 Tel:0086-13262514660
Click here to subscribe us
1. The machine adopts imported PLC control system, or touch switch knob control, elected Schneider (Germany transparent) photoelectric device, variable speed motors, conveyor chain board and imported belt related parts.
2.Host design absorbed import machines’ labeler transmits way, solving the general domestic labeling unstable factors.
3.The machine is suitable for different bottles, easy adjustment, can be finished in a short time.
4.The quick printer adopts the motor drive, gas drive. The words in the ribbon are clear and clean.
5.The whole machine is designed to meet GMP standard.
6.This machine is suitable for medicine, chemical, food, commodity etc. Labeling for bottle and box of flat, square, circle, elliptic, tapered, single orientation etc.
Main technical parameters:
Operating direction Right/Left
Production(bottle/min) 30-160(subject to the size of objects and labels)
Conveyor speed(meter/min) ≤40
Labeling accuracy ±1.0mm
The application label adhesive sticker , transparent or opaque label
The inner diameter of label roll 76mm
The outer diameter of label roll 350mm(max)
The application size of label Width 15-140mm, length15-300mm
The application size of bottle can customized as label objects
Voltage AC 110V/220V 50/60HZ
Machine Size(mm) 2400(L) 1350(W) 1500(H)mm
1. Fix the label roll on the machine according to the graphical representation, adjust the height of each part.
2. Check if all the position of the labels are correct.
3. Adjust the distance between the two rails, the distance between the brush and the conveyer, make sure the distance is suitable for the product to pass.
4. Turn on the power switch, turn on the optoelectronic switch.
5. Turn on switch of the motor and label sending device, debug labeling, if there are any abnormal, get rid of them.
6. Adjust the labeling position.
7. Ensure the test is OK, then operating the machine normally.
8. Power off.
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by misoperation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.