round jar bottle can labeling machines for Egyptian customer automatic adhesive label application

Our Egyptian customer has made a purchase of this round jar labeling machine.There are 3 sizes and one of them have a handle.So we made a railling to hold this handle.so the label applicator can be made according client's requirement.

Main performance features of round jar bottle can labeling machines
1) Applicable to label whole curved surfaces or half curved surfaces on rotundities that can’t stand on their on their own fet with short diameter;
2) Advanved touch human-compater interface which is easy and intuitionistic to operate and has complete functions including abundant online help;
3) The design of special tilting loading material method and conveying by idler wheel makes the objects to labe to be located automatically;
4) Automatic photoelectric detection functions,such as cancelling labeling without objects there,stopping running or raising an alarm without labels to use to avoid omitting or wasting lables;
5) Simple and compact machine construction that is easy to operate and maintain;
6) Well-knowen motor drive is matched with the complete machine that ensures a stable and reliable label-feeding speed.

Application:
Suitable for round objects.

The technical parameters of the Automatic Round Bottle Labeling Machine
Labeling Speed: 0-200 pcs/min
Applicable Labels: core diameter 76mm, outside diameter 300mm
Applicable Products: Diameter from 70mm-100mm, cylindrical products
Accuracy error: ±0.5mm
Voltage: 220V 50/60HZ 250W
Weight: 220kg
Boundary Dimension: 2000mm×600mm×1400mm

1. Fix the label roll on the machine according to the graphical representation, adjust the height of each part.
2. Check if all the position of the labels are correct.
3. Adjust the distance between the two rails, the distance between the brush and the conveyer, make sure the distance is suitable for the product to pass.
4. Turn on the power switch, turn on the optoelectronic switch.
5. Turn on switch of the motor and label sending device, debug labeling, if there are any abnormal, get rid of them.
6. Adjust the labeling position.
7. Ensure the test is OK, then operating the machine normally.
8. Power off.

 About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.

Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
B-On-site installation:
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
C-Technical support:
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer in further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by misoperation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.

Related Products