Small scale automatic toothpaste tube filling and sealing machine for soft tube fill seal system
With CE certificate
Long service life
Low maintenance rate
Meets GMP requirement
Main performance and structure features:
This equipment is widely used in industry of toothpaste, cosmetic, drugs and food etc., it is applicable for various plastic tube and plastic-laminated-tube. It can fill-pack all kinds of cream, latex, lotion, oil and water etc. Before you use our equipment, read this user manual carefully, so that you can make a good use of our products.
This equipment use Panasonic PLC and sensor. It can automatically fill, seal, stamp batch numbers and exit tubes(with 8 tube position) . Inner-heating and outside –heating method is adopted in the heating section, which can blow hot-wind to the tube tail-ends inner wall. The parts touched with material adopt 304 stainless steel, which can proof acid, alkali and corrosion. All the channels can be unloaded fast and agilely. The material-valve can be rotated, it can be cleanout easily, so there’s no place for the dirty. Fixing organization can fix position precisely and firmly. The position-turning part can change speed by using different-frequency. Customers can adjust the working speed themselves.
1.The machine is programmable logical control with touch screen.
2. The machine feeding by hand and automatically positioning the tubes.
3.The heater of inner and outer heating system is stable and efficient.
4.The filling speed of this machine is fast and would not scratch the tube.
5.Filling heads of various size can be selected and matched by yourselves according to the viscosity of your products.
6.This filling and sealing machine is small, exquisite and space-saving.
1.Power supply: ~220V±10%
2.Consume ：350W×2 250W×2
3.Air source:air pressure ＞ 0.4Mpa
4.Filling capacity: 10-250（ml） as per customer demand
5.Speed: 20-40 Tubes/min
6.Measure precision: ±1%
7.Dimension: 1200×600×1500mm (Be adjusted according to your requirement)After packed: 1300*700*1700mm
8.Weight of the machine (kg)：300㎏
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
1. Instruction for Installation and Debugging
Before delivery, we takes responsible for debugging of machine, in order to make sure the provided machine could be safely and smoothly put into operation.
We also take responsibility to have debugging overseas, and Client abroad please sends invitation forward of time to engineer, provides the engineer with round-trip tickets, accommodation, vehicle and $100 per day salary.
2. User Training
Before delivery, we will take responsibility to indoctrinate technical training to the users so that they could understand the machine features and could operate the machine by themselves.
3. Warranty Period
The warranty period for machine is one year with a life long maintenance. If the user requires special quality guarantee, other stipulated warranty period may be made after mutual agreement.Mechanical models are standard, make special design according to customer requirements.
For more information about various high quality machinery,please email via [email protected] or
Call us via:0086-13262514660