Water Bottle Auto OPP/BOPP Hot Melt Label Machine de fusión en caliente de la máquina de etiquetado
For more information about various high quality machinery,please email via [email protected] or browse our Channal at
Lick us on website:
Skype us by :zhang.tracy6
Call us via:0086-13262514660
Main technical parameter
Applicable length of label:78-242mm
Applicable diameter of bottle:30-114mm
Capacity:5,000BPH (500 ml)
Applicable height of label:25 - 205 mm
Applicable material of label:PAPER, PP, BOPP, PVC, PE, ETC
Applicable material of bottle:PE, PET, Glass bottle, POP Can
Power:308 VOLTS, 3 PHASE, 50-60 HZ, 10 KW
Air consumption:340 - 450 L/min (5-6 Kg/Cm²)
Dimension of machine:L1800 × W1800 × H1900 mm
Equipment brief introduction
1. Name: hot melt labeling machine
2. Labeling type: all around
3. Glue type: hot melt
4. Container diameter: ∮35-115
5. Easy operation to adjust label cutting knife
6. Vacuum drum made of high rigid material to reduce friction and static
7. Rapid changeovers: modular design and quick release change parts have changeovers fast
and easy in ten minutes
8. Using handle to adjust the position of cutting knife is possible and exactly
9. Vacuum manifold at the lower part of drum and cutter is made of heat & wear resistant
10. Automatic label length controller to adjust position of I-MARK
1) Label material: OPP, PVC, PAPER etc
2) Label size: as demanded
3) Labeling method: linear type
1. Roll-fed type
2. Label in-fed from label station is conveyed to label in-feed roll-er through label guide roller
3. Sensors will check I-MARK of label automatically when label reaches label in-feed Roller
4. As soon as the position of I-MARK is confirmed, Encoder will adjust the operation speed of label in-feed roller and then appoint the label cutting position
5. Label which has been cut is conveyed to vacuum drum
6. After checking label attached on vacuum drum by sensor, label is conveyed to glue roller and then inject hot melt on label to adjust containers by in-feed star wheel and do labeling in roller zone for the first time and then labeling operation will be done perfectly by side belt.
7. Control: PMC, inverter
8. Overload running safety equipment attached on driving zone
9. Stopper for abnormity operation of in-feed star wheel
10. No bottle fed (sensor check)
11. Overload for bottle fed (sensor check)
12. No bottle no labeling
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 50USD/day.
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by misoperation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.